For PC/AT or Compatibles

Any application related to weighing or measuring forces is now available in your PC...
Stand-alone microcomputer-based interface card requires no other interfacing accessories. Simply connect the cable from each scale directly to the card and you are ready.

• Compatible with all load cells and other strain gage-based transducers.
• Replaces all conventional weight indicators. Card resides directly on computer bus, thus eliminating RS232 and other communication ports.
• Suitable for all dynamic, force measuring and real-time applications.
• Ultra-fast A/D conversions - 500 per second after filtering.
• Optional I/O card - eight outputs and four inputs all opto-isolated.
• Up to 16 cards may be installed in one PC.
• User-friendly easy calibration from the PC keyboard.
• Very useful software package of weighing indicator, counting scale and checkweigher as well as examples on how to access the board are all included.

• Gravimetric filling systems.
• Batching controllers.
• Weigh belt and loss-in-weight controllers.
• High speed checkweighers.
• Multi-scale processing - by using more than one LCIC.
• Weighing in motion (such as trucks on the roads).
• Mutil-head filling machines.
• Peak detector and analyzing forces in press machines.

• User-friendly calibration procedure with automatic zero and gain adjustment.
• Calibration parameters reside in the LCIC memory and are retained even if the card is moved from one PC to another.
• Calibration library. Different calibrations for various scales may be stored in a library for later use on the same card.
• No auxiliary power supply is required. The LCIC powers and senses 6-wire load cells.
• Provides data in weighing units (kg, gr, lb, ton) in ASCII or floating point - usable by almost any programming language.
• Opto-isolated I/O lines enable logic control through user's application program.

• Mapping memory diagnostics - for easy address selection to install the card.
• User-friendly calibration software.
• I/O check and test procedure built into the calibration software.
• Software to utilize the PC as a weighing indicator, counting scale, checkweigher and filling machine.
• Examples in source code on how to access the card.
• Drivers for Win 95/98, Win NT and examples in VB and C++.

• Excitation voltage: 8.2 VDC.
• Internal A/D resolution: 16 bit.
• Internal A/D conversion time: 4000 per second.
• PCB type: multilayer (six layer).
• Power consumption (without load cells): 350mA max @ +5V.
• Updating the PC bus speed: 500 per second.
• L/C range: from 0.2 mV/V up to 3mV/V load cells.
• Number of load-cells: Up to 6 in parallel (350 ohm each).
• Load cell conection: 6 wires(sense)-One 9 pin D type connector.
• Method of communication with the PC BUS: Memory mapped.
• Maximum number of LCIC-1106a boards in a PC: 16.
• Length of cable between the LCIC and the load cells:150 meters.
• Option for RS232 output from the card to remote display .

• Opto-isolated I/O lines enable logic control through user's application program.
• Four inputs - sink or source connection., Maximum transistor current at 30 VDC 12 mA.
• Eight outputs - current source connection 5-30 VCD maximum 80 mA.

• Board length: 220mm.
• Weight: LCIC-1106a: 200 gr I/O Module: 80 gr .